FAQ

FAQ

The area of transport technology is at first sight very difficult. In fact, the whole system works on a basis of understanding which are sufficient to understand a few basic facts. For this reason we decided to prepare you for the following frequently asked questions section, which should help you find answers to your questions.

What type of pulley should I choose?

1. Criterion: The method of mounting:

  • Screwing
  • Mold
  • Suspension

2. Criterion: the use of transport pulleys. Note:

    * Simple pulley - the cheaper alternative, suitable Bow rails for attaching sheets, curtains.
    * Double Pulley - the most recommended type type of pulleys. Having overall better guiding properties, carrying capacity, while their dual suspension lets you apply a smaller size of the overall transport system.
    * Blocks suitable for electric drive - include horizontal stabilizing wheel
    * Horizontal / central rotating - are designed for folding doors "accordion" type.

What is the carrying capacity of the pulleys?

Carrying capacity depends on the type of pulley sheaves, the value of their search in the tables of the products (0-5). Their capacity then distinguish the overall system capacity.

What are the dimensions of the rails?

Size corresponds to the size of the rail pulley (0-5) standard length of rail is 6 m, in the case of interest is not a problem to supply rails to customer (cut in mm). Curved rails then offer an angle of 30 °, 45 ° and 90 °.

What are the possibilities of mounting rails?

Applicable options largely depends from the customer installation options. We offer:

  • Fixed handles, namely:
    • the anchorages suitable for screwing to the ceiling or wall
    • butt welding the mounts
    • on the handles for hanging
  • Adjustable fit, allowing both vertical as well as side-setting travel. It is composed of single or double brackets and fittings for vertical and lateral suspension. The maximum spacing of the mounts for all sizes is always 0.75 m.

How are the guide railes conected?

Guide rails are conected through power connectors.

How is a limited run of pulleys?

In extreme positions surrounding the tube stops running pulleys tupe stop, mounted inside the rails. He then defines the angle stop with stop wings in half-leaf. It is mounted on the wall.

What are the options of bottom line?

Applicable options largely depends from the customer installation options.
We offer:

  • Bottom line by floor guide rail (size 10,19,32) and the track pulleys
  • Bottom linet by external guide pulleys, without rails.

What are the possibilities of surface treatment?

We offer:

  • Galvanized, then passivated (yellow color), as the most suitable for exterior use
  • Silver finish 'rails, which are sendzimir galvanized, idler pulleys and components are then galvanized and blue passivated.
  • No surface treatment (only on the guide rails), is used in case the gate zinc coated as a whole.

LOAD CAPACITY

Size

Double pulley load capacity

(kg)

The weight of each wing (kg) with a straight shift gate with two pulleys

The weight of each wing (kg) by the harmonic and folding doors (2 = one leaf pulley)

 

 

 

Manual control

Electrical control

Manual control

Num. 0

45*

90

45

22

Num. 1

100**

200

100

50

Num. 2

200

400

200

100

Num. 3

300

600

300

150

Num. 4

600

1200

600

300

Num. 5

1000

2000

1000

 

Size

Simple pulley load capacity

(kg)

The weight of each wing (kg) with a straight shift gate with two pulleys

 

The weight of each wing (kg) by the harmonic and folding doors (2 = one leaf pulley)

 

 

 

Manual control

 

Manual control

Num. 0

30

60

 

15

Num. 1

50

100

 

25

Num. 2

100

200

 

50

Num. 3

200

400

 

100

Num. 4

400

800

 

200

Num. 5

700

1400