Type 300

Description

This belt is produced from widely woven flat spiral wire. Alternately to the left and right woven wires are interconnected by cromped cross rods. The ends of these cross rods are finished in a loop or weld. The way of finishing is usually chosen according to cross rod diameters. Thinner rods are finished in a loop and thicker ones in weld. The crimped cross rods allow saving of the original structure of the belt after it is tensioned because they prevent from spiral wires sliding.

Characteristics

  • straight run of the belt
  • the smooth surface of the belt makes possible the transport of products with small contact area
  • large open area allows washing or drying of products on the belt
  • long lifetime of these belts
  • relatively low price compared with other types of belts
  • not suitable for transport of products which leave remains on the belt and can decrease its efficiency by cloging up

Use

As a cooling belt in glass and ceramic factories, a conveyor belt in the confectionery and chocolate industry, a conveyor belt in the chemical industry, a washing belt in the beverage and canning industry, a drying belt in wood-processing industry etc..

Technical data

Pitch of cross rods: 4,30 - 50,80 mm

Pitch of spiral wires: 4.00 - 33,00 mm

Diameter of cross rods: 1,20 - 8,00 mm

Dimension of spiral wires: 1,20 x 0,70 - 4,00 x 2,00 mm

Standard materials: mild steel, stainless steel, stainless steel for high temperatures

Working temperature: up to 750 °C

Edge ends: weld (G), loop (S)

 

References